2021-2026 Ford Bronco Spec Series Rear Bumper
Description
Our Spec Series 6th Gen Bronco Rear Bumper is constructed with 3.5 to 5mm thick steel and finished with a micro-texture black powder coat to guard your vehicle from damages when adventuring off-road. Mount up to two 3-inch pod lights for increased rear lighting, and attach two 1-inch thick D-ring mounts for recovery options when stuck in the backwoods. Utilize the welded-in zip tie tabs for hiding and managing wires from after-market lights.
The sleek modern steel design and added satin black aluminum accent panels gives our bumper a seamless fit that complements your Bronco's styling. Our fully bolt-on design makes installation a breeze with no cutting or drilling required. The bumper is compatible with the OEM tire carrier up to a 37-inch spare. To retain full visibility of the third brake light with a 37-inch spare, purchase our Third Brake Light Extension Bracket. Our bumper allows you to retain full use of the factory hitch.
* Please Note: This is compatible with all trim levels of the 2021+ Bronco, including the Bronco Raptor.
KEY FEATURES:
- 6th Gen Ford Bronco Spec Series Rear Bumper
- Direct Fit that Enhances Factory Styling
- Compatible with Factory Hitch
- Features Welded-In Zip Tie Tabs for Clean Wire Management
- Fully Bolt-On Design That Doesn't Require Modification or Drilling
- Aluminum Backed Logo
- Mounts (2) 3" Light Pods
- Features (2) 1" Thick D-Ring Mounts that Accept a 7/8" Pin
- Up to a 37" Spare Tire Will Fit Above the Bumper on the OEM Carrier
- Compatible with All Trim Levels (Including Raptor)
- Micro-Texture Black Powder Coat
- Satin Black Accent Panel
- All Mounting Hardware is Included
Fitment:
| Model | Fit |
|---|---|
| 2021-2026 Ford Bronco | All trims including Raptor |
Technical Specifications:
- Material: 3.5mm & 5mm Steel Plate
- Finish: Micro-texture Black Powder Coat
- Will it work with factory sensors?: Yes
- Installation Notes: Bolt-On installation. Estimated 3 hour install.
Installation Guide:
RBBR-05_Install_Guide__Final.pdf
- Disclaimer: The incorporated D-Ring Mounts are to be used ONLY in recovery situations. Our products are NOT intended for flat towing.
Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Share some information about your product
Share some information about your product
Description
Our Spec Series 6th Gen Bronco Rear Bumper is constructed with 3.5 to 5mm thick steel and finished with a micro-texture black powder coat to guard your vehicle from damages when adventuring off-road. Mount up to two 3-inch pod lights for increased rear lighting, and attach two 1-inch thick D-ring mounts for recovery options when stuck in the backwoods. Utilize the welded-in zip tie tabs for hiding and managing wires from after-market lights.
The sleek modern steel design and added satin black aluminum accent panels gives our bumper a seamless fit that complements your Bronco's styling. Our fully bolt-on design makes installation a breeze with no cutting or drilling required. The bumper is compatible with the OEM tire carrier up to a 37-inch spare. To retain full visibility of the third brake light with a 37-inch spare, purchase our Third Brake Light Extension Bracket. Our bumper allows you to retain full use of the factory hitch.
* Please Note: This is compatible with all trim levels of the 2021+ Bronco, including the Bronco Raptor.
KEY FEATURES:
- 6th Gen Ford Bronco Spec Series Rear Bumper
- Direct Fit that Enhances Factory Styling
- Compatible with Factory Hitch
- Features Welded-In Zip Tie Tabs for Clean Wire Management
- Fully Bolt-On Design That Doesn't Require Modification or Drilling
- Aluminum Backed Logo
- Mounts (2) 3" Light Pods
- Features (2) 1" Thick D-Ring Mounts that Accept a 7/8" Pin
- Up to a 37" Spare Tire Will Fit Above the Bumper on the OEM Carrier
- Compatible with All Trim Levels (Including Raptor)
- Micro-Texture Black Powder Coat
- Satin Black Accent Panel
- All Mounting Hardware is Included
Fitment:
| Model | Fit |
|---|---|
| 2021-2026 Ford Bronco | All trims including Raptor |
Technical Specifications:
- Material: 3.5mm & 5mm Steel Plate
- Finish: Micro-texture Black Powder Coat
- Will it work with factory sensors?: Yes
- Installation Notes: Bolt-On installation. Estimated 3 hour install.
Installation Guide:
RBBR-05_Install_Guide__Final.pdf
- Disclaimer: The incorporated D-Ring Mounts are to be used ONLY in recovery situations. Our products are NOT intended for flat towing.
Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Share some information about your product
Share some information about your product
Customers Reviews
Absolutely love my new jumpsuit! It’s so comfortable and stylish. Perfect for any occasion. I’ve already recommended it to all my friends!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The quality of the skirts is amazing. I’ve never found anything that fits so well and looks so good at the same time. Highly recommend!
I’ve been looking for a good quality bodysuit for a while, and I finally found the one! Comfortable, chic, and versatile for any outfit!