2021-2026 Ford Bronco MTO Series Rear Bumper
Description
This Bronco Rear Bumper is part of the MTO Series (Made to Overland), and is compatible with all Bronco trim levels. Manufactured from high grade steel, it was designed to protect the rear end while maintaining high ground clearance. We've placed the license plate mount at the side of the bumper, in order to accommodate the Sasquatch package 35-inch tires, and to ensure the tail gate swings open freely. The bumper can fit up to a 37-inch tire on the OEM carrier above. To keep full visibility of the third brake light with a 37" spare, use our third brake light extension. Included with the new license plate bracket are license plate lights.
Two 3-inch flush mount pod lights can be mounted towards either side of the bumper. These can be wired to the reverse lights, or to a separate wiring harness in order to provide supplemental lighting at the rear of your Bronco while on the trail. There are 2 clevis mounts that take 3/4-inch D-ring shackles to provide recovery options. The MTO Series bumper includes sensor holes to retain full functionality of the factory backup sensors.
* Please Note: If equipped with Blind Spot Detection (BLIS-Blind Spot Information System), you will need to use the LPBR-03 to keep use of this feature.
Key Features
- (2) Mounts for 3" Flush Mount Pod Lights
- Reinforced D-Ring Mounts
- 2-Stage Micro-Texture Black Powder Coating
- Retains Factory Backup Sensors, but if equipped with factory plastic bumpers, we highly recommend using OE sensor bezels or DV8 part #MPRSNSR-01.
- 4mm Body and 5mm Mounts/Supports
- Paintable Aluminum Mesh Panels
- Accommodates up to 37" Spare Tire on OEM carrier
- Compatible with Factory Tow Hitch
Fitment:
| Model | Fit |
|---|---|
| 2021-2026 Ford Bronco |
|
Technical Specifications:
- D-Ring Mount Included: Yes
- Weight:≈ 79 lb.
- Light Mounts Included: Yes
- Fitment: Direct Fit
- Finish: Micro Texture Black Powder Coat
- Material: Steel & Aluminum
- Reverse Sensor Compatible: Yes
- Install Notes: Installation time is around 2.5 hours. 2 people are needed to lift the bumper into place.
Installation Guide:
- Disclaimer: The incorporated D-Ring Mounts are to be used ONLY in recovery situations. Our products are NOT intended for flat towing.
Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Share some information about your product
Share some information about your product
Description
This Bronco Rear Bumper is part of the MTO Series (Made to Overland), and is compatible with all Bronco trim levels. Manufactured from high grade steel, it was designed to protect the rear end while maintaining high ground clearance. We've placed the license plate mount at the side of the bumper, in order to accommodate the Sasquatch package 35-inch tires, and to ensure the tail gate swings open freely. The bumper can fit up to a 37-inch tire on the OEM carrier above. To keep full visibility of the third brake light with a 37" spare, use our third brake light extension. Included with the new license plate bracket are license plate lights.
Two 3-inch flush mount pod lights can be mounted towards either side of the bumper. These can be wired to the reverse lights, or to a separate wiring harness in order to provide supplemental lighting at the rear of your Bronco while on the trail. There are 2 clevis mounts that take 3/4-inch D-ring shackles to provide recovery options. The MTO Series bumper includes sensor holes to retain full functionality of the factory backup sensors.
* Please Note: If equipped with Blind Spot Detection (BLIS-Blind Spot Information System), you will need to use the LPBR-03 to keep use of this feature.
Key Features
- (2) Mounts for 3" Flush Mount Pod Lights
- Reinforced D-Ring Mounts
- 2-Stage Micro-Texture Black Powder Coating
- Retains Factory Backup Sensors, but if equipped with factory plastic bumpers, we highly recommend using OE sensor bezels or DV8 part #MPRSNSR-01.
- 4mm Body and 5mm Mounts/Supports
- Paintable Aluminum Mesh Panels
- Accommodates up to 37" Spare Tire on OEM carrier
- Compatible with Factory Tow Hitch
Fitment:
| Model | Fit |
|---|---|
| 2021-2026 Ford Bronco |
|
Technical Specifications:
- D-Ring Mount Included: Yes
- Weight:≈ 79 lb.
- Light Mounts Included: Yes
- Fitment: Direct Fit
- Finish: Micro Texture Black Powder Coat
- Material: Steel & Aluminum
- Reverse Sensor Compatible: Yes
- Install Notes: Installation time is around 2.5 hours. 2 people are needed to lift the bumper into place.
Installation Guide:
- Disclaimer: The incorporated D-Ring Mounts are to be used ONLY in recovery situations. Our products are NOT intended for flat towing.
Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Share some information about your product
Share some information about your product
Customers Reviews
Absolutely love my new jumpsuit! It’s so comfortable and stylish. Perfect for any occasion. I’ve already recommended it to all my friends!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The quality of the skirts is amazing. I’ve never found anything that fits so well and looks so good at the same time. Highly recommend!
I’ve been looking for a good quality bodysuit for a while, and I finally found the one! Comfortable, chic, and versatile for any outfit!