2018-2026 Jeep Wrangler JL MTO Series Rear Bumper
Description
This Made to Overland Series Jeep Wrangler Rear Bumper was designed for heavy off-road use and is compatible with our Jeep JL Bumper Mounted MTO Tire Carrier. The bumper features a full-width design with tapered wings that look great with both factory & aftermarket fender flares. The OEM spare tire mount can fit up to a 37-inch spare tire above the bumper center step. The MTO retains use of the factory hitch & harness, and features sensor cutouts to retain full functionality of parking sensors.
Two 3-inch light pods can be mounted behind the perforated aluminum accent panels for supplemental rear lighting. These could be wired to a separate switch or to your reverse lights. The bumper also has (2) 1-inch thick clevis mounts compatible with ¾-inch D-ring shackles to provide recovery options. A license plate bracket with an included light relocates your license plate away from the spare tire area to keep it visible when running a spare. On the interior of the bumper are welded zip-tie tabs for clean wire management. Our MTO Jeep Bumper has a fully bolt-on installation with no modifications required.
Key Features:
- Full Width Design Matching Factory & Aftermarket Fenders
- Compatible with our Jeep JL Bumper Mounted MTO Tire Carrier (TCJL-13)
- Compatible with Factory Hitch & Harness
- Mounts for (2) 3” Light Pods Behind Perforated Aluminum Panels
- 1” Thick Mounts for ¾” D-Rings (⅞” Shackle Pins)
- Retains Full Functionality of Parking Sensors (If equipped)
- OEM Mount Can Fit up to a 37” Spare Tire
- Includes License Plate Relocation Bracket and License Plate Light
- Minor Wiring Required for License Plate Light
- Welded-in Zip Tie Tabs for Clean Wire Management
- Micro-Texture Black Powder Coat Finish
- Bolt-On Installation
Fitment:
| Model | Fit |
|---|---|
| Jeep Wrangler JL | 2018-2025 |
Technical Specifications:
- Material: 3.5mm and 5mm Steel Plate
- Finish: Micro-Texture Black Powder Coat
- Will it work with factory sensors? If you don’t have factory sensors, are plugs included?: Yes
- Installation Notes: Direct-Fit Bolt On. Estimated 3-hour install.
Installation Guide:
RBJL-13_Install_Guide_Final.pdf
Share some information about your product
Share some information about your product
Description
This Made to Overland Series Jeep Wrangler Rear Bumper was designed for heavy off-road use and is compatible with our Jeep JL Bumper Mounted MTO Tire Carrier. The bumper features a full-width design with tapered wings that look great with both factory & aftermarket fender flares. The OEM spare tire mount can fit up to a 37-inch spare tire above the bumper center step. The MTO retains use of the factory hitch & harness, and features sensor cutouts to retain full functionality of parking sensors.
Two 3-inch light pods can be mounted behind the perforated aluminum accent panels for supplemental rear lighting. These could be wired to a separate switch or to your reverse lights. The bumper also has (2) 1-inch thick clevis mounts compatible with ¾-inch D-ring shackles to provide recovery options. A license plate bracket with an included light relocates your license plate away from the spare tire area to keep it visible when running a spare. On the interior of the bumper are welded zip-tie tabs for clean wire management. Our MTO Jeep Bumper has a fully bolt-on installation with no modifications required.
Key Features:
- Full Width Design Matching Factory & Aftermarket Fenders
- Compatible with our Jeep JL Bumper Mounted MTO Tire Carrier (TCJL-13)
- Compatible with Factory Hitch & Harness
- Mounts for (2) 3” Light Pods Behind Perforated Aluminum Panels
- 1” Thick Mounts for ¾” D-Rings (⅞” Shackle Pins)
- Retains Full Functionality of Parking Sensors (If equipped)
- OEM Mount Can Fit up to a 37” Spare Tire
- Includes License Plate Relocation Bracket and License Plate Light
- Minor Wiring Required for License Plate Light
- Welded-in Zip Tie Tabs for Clean Wire Management
- Micro-Texture Black Powder Coat Finish
- Bolt-On Installation
Fitment:
| Model | Fit |
|---|---|
| Jeep Wrangler JL | 2018-2025 |
Technical Specifications:
- Material: 3.5mm and 5mm Steel Plate
- Finish: Micro-Texture Black Powder Coat
- Will it work with factory sensors? If you don’t have factory sensors, are plugs included?: Yes
- Installation Notes: Direct-Fit Bolt On. Estimated 3-hour install.
Installation Guide:
RBJL-13_Install_Guide_Final.pdf
Share some information about your product
Share some information about your product
Customers Reviews
Absolutely love my new jumpsuit! It’s so comfortable and stylish. Perfect for any occasion. I’ve already recommended it to all my friends!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The quality of the skirts is amazing. I’ve never found anything that fits so well and looks so good at the same time. Highly recommend!
I’ve been looking for a good quality bodysuit for a while, and I finally found the one! Comfortable, chic, and versatile for any outfit!