2018-2026 Jeep Wrangler JL FS-15 Series Rear Bumper
Description
Our FS-15 Series Wrangler JL Rear Bumper features an extreme, low-profile design suited for aggressive rock crawling. The bumper includes a license plate relocation bracket with a license plate light to make room for up to 37-inch spare tires above the bumper. The factory hitch and harness fit perfectly in an accessible position beneath the FS-15. For models equipped with factory sensors, we included sensor cutouts to retain full functionality of the feature. For models without factory sensors, we include sensor hole plugs for a clean look.
Toward each side of this rugged, Jeep bumper are 1-inch thick mounts that take ¾-inch D-Rings with ⅞-inch shackle pins. These can be used as anchor points for recovery situations if you or your trail buddy get stuck on an obstacle. The inside of the bumper includes welded zip-tie tabs for clean wire management of the license plate light or other optional accessories. Finished in a micro-texture black powder coat, this bumper features a fully bolt-on installation.
*Please Note: Not recommended for those with a factory spare wheel with no aftermarket carrier. A minimum 4.5” backspacing is recommended. Aftermarket carrier/tire mount riser required if running tire size larger than equipped from factory.
Features:
- High Clearance Design for Aggressive Rock Crawling
- Retains Factory Rear Bumper Sensors (Recommend Using our Sensor Bezels)
- Compatible with Factory Hitch
- License Plate Relocation Bracket with Plate Light
- 1” Thick Mounts for D-Ring with ⅞” Shackle Pins (Not Included)
- Welded-in Zip Tie Tabs for Clean Wire Management
- Micro-Texture Black Powder Coat
- Direct Fit Bolt-On Installation
Fitment:
| Model | Fit |
|---|---|
| Jeep Wrangler JL | 2018-2025 |
Technical Specifications:
- Material: 3mm, 3.5mm, and 5mm Steel Plate
- Finish: Micro-Texture Black Powder Coat
- Will it fit all sub-models? 2-Door and 4-Door?: Yes
- Installation Notes: Minor wiring required for license plate relocation. Estimated 3 hour install.
Installation Guide:
RBJL-11_Install_Guide_Final_v2.pdf
Share some information about your product
Share some information about your product
Description
Our FS-15 Series Wrangler JL Rear Bumper features an extreme, low-profile design suited for aggressive rock crawling. The bumper includes a license plate relocation bracket with a license plate light to make room for up to 37-inch spare tires above the bumper. The factory hitch and harness fit perfectly in an accessible position beneath the FS-15. For models equipped with factory sensors, we included sensor cutouts to retain full functionality of the feature. For models without factory sensors, we include sensor hole plugs for a clean look.
Toward each side of this rugged, Jeep bumper are 1-inch thick mounts that take ¾-inch D-Rings with ⅞-inch shackle pins. These can be used as anchor points for recovery situations if you or your trail buddy get stuck on an obstacle. The inside of the bumper includes welded zip-tie tabs for clean wire management of the license plate light or other optional accessories. Finished in a micro-texture black powder coat, this bumper features a fully bolt-on installation.
*Please Note: Not recommended for those with a factory spare wheel with no aftermarket carrier. A minimum 4.5” backspacing is recommended. Aftermarket carrier/tire mount riser required if running tire size larger than equipped from factory.
Features:
- High Clearance Design for Aggressive Rock Crawling
- Retains Factory Rear Bumper Sensors (Recommend Using our Sensor Bezels)
- Compatible with Factory Hitch
- License Plate Relocation Bracket with Plate Light
- 1” Thick Mounts for D-Ring with ⅞” Shackle Pins (Not Included)
- Welded-in Zip Tie Tabs for Clean Wire Management
- Micro-Texture Black Powder Coat
- Direct Fit Bolt-On Installation
Fitment:
| Model | Fit |
|---|---|
| Jeep Wrangler JL | 2018-2025 |
Technical Specifications:
- Material: 3mm, 3.5mm, and 5mm Steel Plate
- Finish: Micro-Texture Black Powder Coat
- Will it fit all sub-models? 2-Door and 4-Door?: Yes
- Installation Notes: Minor wiring required for license plate relocation. Estimated 3 hour install.
Installation Guide:
RBJL-11_Install_Guide_Final_v2.pdf
Share some information about your product
Share some information about your product
Customers Reviews
Absolutely love my new jumpsuit! It’s so comfortable and stylish. Perfect for any occasion. I’ve already recommended it to all my friends!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The quality of the skirts is amazing. I’ve never found anything that fits so well and looks so good at the same time. Highly recommend!
I’ve been looking for a good quality bodysuit for a while, and I finally found the one! Comfortable, chic, and versatile for any outfit!