2021-2026 Ford Bronco OE Plus Series Front Bumper
Description
The OE Plus Series is a Low-Profile Front Bumper for the 2021-2024 Ford Bronco. This was designed to fit the form of the Bronco as tight as the OEM bumper. The front panel was designed to match the grille of the higher-tier trim levels, although it looks excellent with the lower-tier trim levels as well. Behind this cutaway pattern, a Dual Row 20-inch LED light bar can mounted. It features pod light mounts on each side of the bumper, that fit 2 pods each.
The Adaptive Cruise Control sensor module must be relocated if the vehicle is equipped with ACC. Our ACC Relocation Bracket is sold separately, available in the drop-down options to the right.
** An Optional Steel Skid Plate is available for this bumper.
Key Features:
- 20" Dual Row Light Bar Mount
- (4) 3" Pod Light Mounts
- 3-Piece Design
- 2-Stage Micro-Texture Black Powder Coating
- 4mm body and 5mm mounts/supports
- Reinforced D-Ring Mounts
- Compatible with Factory Plastic and Metal Skid Plates
- Does not Interfere with 360° Camera
- Works with Factory Parking Sensors
- 3-Piece Construction
Fitment:
| Model | Fit |
|---|---|
| 2021-2026 Ford Bronco |
|
Technical Specifications:
- D-Ring Mount Included: Yes
- Winch Compatible: No
- Width: Full
- Weight:~59 lbs
- Light Mounts Included: Yes
- Fitment: Direct Fit
- Finish: Micro Texture Black Powder Coat
- Material: Steel & Aluminum
- Parking Sensor Compatible: Yes
- Adaptive Cruise Control: Must be relocated for bumper to fit.
- Front Camera: Bumper is partially visible, but does not impede lane detection.
- Factory Skid Plate: Both plastic and metal skid plates fit with this bumper.
- Factory Fog Lights: Do not fit in bumper.
- Installation: This bumper takes approximately 1.5 hours to install. 2 people are needed to safely lift the bumper into place.
Installation Guide:
- Disclaimer: The incorporated D-Ring Mounts are to be used ONLY in recovery situations. Our products are NOT intended for flat towing.
Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Share some information about your product
Share some information about your product
Description
The OE Plus Series is a Low-Profile Front Bumper for the 2021-2024 Ford Bronco. This was designed to fit the form of the Bronco as tight as the OEM bumper. The front panel was designed to match the grille of the higher-tier trim levels, although it looks excellent with the lower-tier trim levels as well. Behind this cutaway pattern, a Dual Row 20-inch LED light bar can mounted. It features pod light mounts on each side of the bumper, that fit 2 pods each.
The Adaptive Cruise Control sensor module must be relocated if the vehicle is equipped with ACC. Our ACC Relocation Bracket is sold separately, available in the drop-down options to the right.
** An Optional Steel Skid Plate is available for this bumper.
Key Features:
- 20" Dual Row Light Bar Mount
- (4) 3" Pod Light Mounts
- 3-Piece Design
- 2-Stage Micro-Texture Black Powder Coating
- 4mm body and 5mm mounts/supports
- Reinforced D-Ring Mounts
- Compatible with Factory Plastic and Metal Skid Plates
- Does not Interfere with 360° Camera
- Works with Factory Parking Sensors
- 3-Piece Construction
Fitment:
| Model | Fit |
|---|---|
| 2021-2026 Ford Bronco |
|
Technical Specifications:
- D-Ring Mount Included: Yes
- Winch Compatible: No
- Width: Full
- Weight:~59 lbs
- Light Mounts Included: Yes
- Fitment: Direct Fit
- Finish: Micro Texture Black Powder Coat
- Material: Steel & Aluminum
- Parking Sensor Compatible: Yes
- Adaptive Cruise Control: Must be relocated for bumper to fit.
- Front Camera: Bumper is partially visible, but does not impede lane detection.
- Factory Skid Plate: Both plastic and metal skid plates fit with this bumper.
- Factory Fog Lights: Do not fit in bumper.
- Installation: This bumper takes approximately 1.5 hours to install. 2 people are needed to safely lift the bumper into place.
Installation Guide:
- Disclaimer: The incorporated D-Ring Mounts are to be used ONLY in recovery situations. Our products are NOT intended for flat towing.
Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Share some information about your product
Share some information about your product
Customers Reviews
Absolutely love my new jumpsuit! It’s so comfortable and stylish. Perfect for any occasion. I’ve already recommended it to all my friends!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The quality of the skirts is amazing. I’ve never found anything that fits so well and looks so good at the same time. Highly recommend!
I’ve been looking for a good quality bodysuit for a while, and I finally found the one! Comfortable, chic, and versatile for any outfit!