2021-2026 Ford Bronco FS-15 Series Rear Bumper
Description
The FS-15 Series Bronco Rear Bumper was designed to maximize ground clearance when taking your Bronco off-road. It provides superior rear-end protection while closely following the factory body style and contours. The license plate mount is located above the bumper and includes an LED plate light. Up to a 37-inch spare tire mounted on the OEM carrier will fit above the bumper. To keep full visibility of the third brake light with a 37" spare, use our third brake light extension.
Two 3-inch flush mount pod lights can be installed towards either side of the bumper to provide supplemental trail lighting. Alternatively, they can be wired together and work in tandem with your reverse lights. Two reinforced clevis mounts that take ¾-inch D-ring shackles provide recovery options during your off-road adventures.
Our high clearance Bronco bumper is constructed of 3.5mm steel plating with 5mm steel supports, and then finished in a finely textured black powder coat to protect against rust.
Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.
* Please Note: If equipped with Blind Spot Detection (BLIS-Blind Spot Information System), you will need to use the LPBR-03 to keep use of this feature.
Key Features:
- Higher Than Factory Ground Clearance
- 3.5mm Steel Plates with 5mm Steel Supports
- Micro Texture Black Powder Coat
- Accepts Two, 3" Flush Mount LED Pod Lights
- Dual Clevis Mounts for ¾" D-Ring Shackles
- Retains Factory Backup Sensors
- Accommodates up to 37" Spare Tire
- Compatible with Factory Tow Hitch
Fitment:
| Model | Fit |
|---|---|
| 2021-2026 Ford Bronco |
|
Technical Specifications:
- Fitment: Direct Fit
- Material: 3mm/5mm Steel
- Finish: Micro-Texture Black Powder Coat
- Weight:~76 lbs
- Lights Included: No
- D-rings Included: No
- Hardware Included: Yes
- Compatible with Factory Hitch and Sensors: Yes
- Install Time:~2.5 hours
Installation Guide:
- Disclaimer: The incorporated D-Ring Mounts are to be used ONLY in recovery situations. Our products are NOT intended for flat towing.
Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Share some information about your product
Share some information about your product
Description
The FS-15 Series Bronco Rear Bumper was designed to maximize ground clearance when taking your Bronco off-road. It provides superior rear-end protection while closely following the factory body style and contours. The license plate mount is located above the bumper and includes an LED plate light. Up to a 37-inch spare tire mounted on the OEM carrier will fit above the bumper. To keep full visibility of the third brake light with a 37" spare, use our third brake light extension.
Two 3-inch flush mount pod lights can be installed towards either side of the bumper to provide supplemental trail lighting. Alternatively, they can be wired together and work in tandem with your reverse lights. Two reinforced clevis mounts that take ¾-inch D-ring shackles provide recovery options during your off-road adventures.
Our high clearance Bronco bumper is constructed of 3.5mm steel plating with 5mm steel supports, and then finished in a finely textured black powder coat to protect against rust.
Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.
* Please Note: If equipped with Blind Spot Detection (BLIS-Blind Spot Information System), you will need to use the LPBR-03 to keep use of this feature.
Key Features:
- Higher Than Factory Ground Clearance
- 3.5mm Steel Plates with 5mm Steel Supports
- Micro Texture Black Powder Coat
- Accepts Two, 3" Flush Mount LED Pod Lights
- Dual Clevis Mounts for ¾" D-Ring Shackles
- Retains Factory Backup Sensors
- Accommodates up to 37" Spare Tire
- Compatible with Factory Tow Hitch
Fitment:
| Model | Fit |
|---|---|
| 2021-2026 Ford Bronco |
|
Technical Specifications:
- Fitment: Direct Fit
- Material: 3mm/5mm Steel
- Finish: Micro-Texture Black Powder Coat
- Weight:~76 lbs
- Lights Included: No
- D-rings Included: No
- Hardware Included: Yes
- Compatible with Factory Hitch and Sensors: Yes
- Install Time:~2.5 hours
Installation Guide:
- Disclaimer: The incorporated D-Ring Mounts are to be used ONLY in recovery situations. Our products are NOT intended for flat towing.
Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Share some information about your product
Share some information about your product
Customers Reviews
Absolutely love my new jumpsuit! It’s so comfortable and stylish. Perfect for any occasion. I’ve already recommended it to all my friends!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The quality of the skirts is amazing. I’ve never found anything that fits so well and looks so good at the same time. Highly recommend!
I’ve been looking for a good quality bodysuit for a while, and I finally found the one! Comfortable, chic, and versatile for any outfit!