Tensorgrip P307 Multi Purpose Contact Adhesive - 21.9oz
Tensorgrip® P307 is a multi-purpose contact adhesive that effectively bonds a vast range of substrates while maintaining compliance with stringent California VOC requirements (SCAQMD Rule 1168). Tensorgrip® P307 is aggressive and versatile, lending itself to bonding flexible and porous materials with ease.
Key Features: Tensorgrip P307 Multi Purpose Contact Adhesive - 21.9oz
- High Tack
- Excellent high coverage
- 650ml = 21.98 oz aerosol can
- 80% of final strength achieved immediately
- Full strength achieved in 24 hours
- Fast drying with long open time
- Low VOC California Compliant (SCAQMD Rule 1168)
- Excellent green strength and high heat resistance
- Over 220°F (105°C) temperature resistant
- Also bonds: veneers, cork, fiberglass and many
plastics - Excellent bonding to porous substrates
- Aggressive – adheres to nearly any surface
- Good heat resistance (up to 180°F/82°C)
- High-strength, long-term bond
- Strong initial bond
DIRECTIONS FOR USE
- TensorGrip P307 is designed as a portable, self contained spray system for field or shop applications.
- Apply adhesive to both surfaces to be mated, at 80% to 100% coverage.
- Allow enough time (2-4 minutes or until dry to the touch) for the adhesive to become tacky before bonding.
- Parts should be mated with as much pressure as practical.
- Normal coverage required with web spray pattern is approximately 80%; however, porous surfaces may need a second coat. Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in 1-3 days.
- Canister system will spray adequately above 60º F. Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended.
- Notice!!! Do not store at temperatures over 120º F.
Canister Storage/Changeover
- If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister. Close and lock the spray gun.
- To change or disconnect canister: turn canister valve to the off position, spray out remaining adhesive left in the hose, disconnect the spray hose and gun from the canister.
- Reconnect the spray hose to a new canister of adhesive. OR if you are NOT connecting to a new canister, connect hose to canister of cleaning solvent (sold separately) and spray out until liquid is clear which indicates that the hose and gun is clean.
Chemical Technical Data
- Total Solids: 32-38%
- VOC Content: 35.9% by weight (Aerosol) / 45 g/L (Canister)(not available)
- Color: Clear or Red
- Flammability: Non-Flammable adhesive; Flammable propellant
- Solvent: Methylene Chloride
- Dry time: 2-4 mins dependent on temp & humidity
- Open time: Long
- Shelf Life: 18 months from date of manufacture
- 21.9 oz. can
!!This item cannot ship USPS!!
Documents: Tensorgrip P307 High Temp General Contact Adhesive
Tensorgrip P307 Technical Data Sheet
Share some information about your product
Share some information about your product
Tensorgrip® P307 is a multi-purpose contact adhesive that effectively bonds a vast range of substrates while maintaining compliance with stringent California VOC requirements (SCAQMD Rule 1168). Tensorgrip® P307 is aggressive and versatile, lending itself to bonding flexible and porous materials with ease.
Key Features: Tensorgrip P307 Multi Purpose Contact Adhesive - 21.9oz
- High Tack
- Excellent high coverage
- 650ml = 21.98 oz aerosol can
- 80% of final strength achieved immediately
- Full strength achieved in 24 hours
- Fast drying with long open time
- Low VOC California Compliant (SCAQMD Rule 1168)
- Excellent green strength and high heat resistance
- Over 220°F (105°C) temperature resistant
- Also bonds: veneers, cork, fiberglass and many
plastics - Excellent bonding to porous substrates
- Aggressive – adheres to nearly any surface
- Good heat resistance (up to 180°F/82°C)
- High-strength, long-term bond
- Strong initial bond
DIRECTIONS FOR USE
- TensorGrip P307 is designed as a portable, self contained spray system for field or shop applications.
- Apply adhesive to both surfaces to be mated, at 80% to 100% coverage.
- Allow enough time (2-4 minutes or until dry to the touch) for the adhesive to become tacky before bonding.
- Parts should be mated with as much pressure as practical.
- Normal coverage required with web spray pattern is approximately 80%; however, porous surfaces may need a second coat. Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in 1-3 days.
- Canister system will spray adequately above 60º F. Canister system should be kept in warm area. In the event that the canister gets abnormally chilled, freezes or gives poor or sputtering spray, it should be warmed up before continued usage. Warming canister by immersion in warm water is recommended.
- Notice!!! Do not store at temperatures over 120º F.
Canister Storage/Changeover
- If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister. Close and lock the spray gun.
- To change or disconnect canister: turn canister valve to the off position, spray out remaining adhesive left in the hose, disconnect the spray hose and gun from the canister.
- Reconnect the spray hose to a new canister of adhesive. OR if you are NOT connecting to a new canister, connect hose to canister of cleaning solvent (sold separately) and spray out until liquid is clear which indicates that the hose and gun is clean.
Chemical Technical Data
- Total Solids: 32-38%
- VOC Content: 35.9% by weight (Aerosol) / 45 g/L (Canister)(not available)
- Color: Clear or Red
- Flammability: Non-Flammable adhesive; Flammable propellant
- Solvent: Methylene Chloride
- Dry time: 2-4 mins dependent on temp & humidity
- Open time: Long
- Shelf Life: 18 months from date of manufacture
- 21.9 oz. can
!!This item cannot ship USPS!!
Documents: Tensorgrip P307 High Temp General Contact Adhesive
Tensorgrip P307 Technical Data Sheet
Share some information about your product
Share some information about your product
Customers Reviews
Absolutely love my new jumpsuit! It’s so comfortable and stylish. Perfect for any occasion. I’ve already recommended it to all my friends!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The leggings I bought fit like a dream! The fabric is soft, and they hold up perfectly after every wash. Great quality!
The quality of the skirts is amazing. I’ve never found anything that fits so well and looks so good at the same time. Highly recommend!
I’ve been looking for a good quality bodysuit for a while, and I finally found the one! Comfortable, chic, and versatile for any outfit!